جديد حصادة لعباد الشمس Maans

Sunflower Header MAANS – S “Gorlytsia” 12-70
The MAANS – S “Gorlytsia” 12-70 sunflower header is a universal full-cut header designed for harvesting crops regardless of row spacing. With this header, you can efficiently harvest crops with row spacing from 40 to 75 cm. Mounted on a self-propelled combine harvester, it is intended for cutting all types of sunflower at ground level. Any other use is considered improper application. The header must be used exclusively with combines approved for use with the appropriate adapter (conversion frame).

A radial-pin safety clutch is installed to limit torque and protect the auger’s drive and transmission mechanisms from overloads that may occur during operation.

The reel height is hydraulically adjustable directly from the operator’s cab, allowing the header to be fine-tuned according to the variety and height of the crop.

The feed auger is a single-piece construction without additional joints or fasteners, ensuring maximum material feeding speed into the combine’s feeder house.

The auger drive is equipped with a torque limiter to protect against foreign objects and prevent equipment damage.

All drive shafts are made from hardened alloy steel to ensure maximum service life and minimize mechanical wear.

The entire cutting system, including the drive, is made from high-quality components. All parts of the cutting system are manufactured from special wear-resistant steel, ensuring minimal crop loss during harvest.

Specifications:
Parameter Value
Working width 8.23 m
Divider width/length 170 / 1400 mm
Row spacing 225 mm
Auger diameter 390 mm
Cutting speed ~ 800 cuts per minute
Auger pitch 500 mm
Auger speed ~ 160 rpm
Knife drive Schumacher planetary drive
Weight 2700 kg